Styling panel FV360_11-2|FutureView360

$0.01

Description

Styling panel

01

造型平板

We visited many countries and recorded many buildings, including details of decoration. From indoors to outdoors, we also recorded the evolution of different eras. We have different decorative molds like GRC and GRG feature mold. And hope to share this technology with everyone,  Specializing in the development Of this decorative produce, for building-related development requests, contact us.

我們訪問了許多國家並記錄了許多建築物,包括裝飾細節。 從室內到室外,我們還記錄了不同時代的演變。 我們有不同的裝飾模具,如GRC和GRG特徵模具。 並希望與大家分享這項技術,專注於開發這種裝飾產品,與建築相關的開發請求,請聯繫我們。

If any interesting for design might contact us for architectural development, we have Master Planning, tourist attraction design, Architecture exterior and interior design. Hope to pay more attention to us. Thank you.

如果有任何有趣的設計可能會聯繫我們的建築發展,我們有總體規劃,旅遊景點設計,建築外觀和室內設計。 希望能多關注我們。 謝謝。


Uses: GRC panel and wall tiles
Applications: residential, commercial, retail, kitchen interior walls and floors
Features: modern, beautiful

用途:GRC平板和牆磚
應用:住宅,商業,零售,廚房內牆和地板
特徵:現代,美觀

FV360_11-2

Characteristics 特點

1, light weight
The density of traditional GRC products is about 3001KG/M3, while the average density of finished GFRC products is only 1301KG/M3.
2, no deformation
Because the main material has no corrosive effect on the glass fiber, and the dry and wet shrinkage of the main material is less than 0.01%, the performance of the product can be ensured to be stable, no cracking, no deformation, and long service life.
3, high intensity
After curing inspection, the impact strength was 141 MPa and the flexural strength was 27 MPa.
4, low corrosivity
The current GRC products are made of glass fiber reinforced with a pH of up to 13, which is strongly alkaline, so its strength will gradually decrease with time. The pH of the liquid slurry of GFRC is between 7-8, close to neutral, and the alkalinity is much lower than that of GRC products. It is non-corrosive to glass fiber, thus ensuring the stability of its own performance.
5, the processing cycle is short
The product release time is only 30-45 minutes, and the drying time is only 4 hours, which can fully guarantee the progress schedule requirements.
6. Convenient and flexible construction
The on-site processing performance is good, and the sawing, planing, nailing, chiseling, drilling and pasting operations can be carried out according to the specific site conditions, and the installation process is simple and rapid. Compared with the traditional GRC product operation process, the construction period is greatly shortened.
7, strong modeling ability
Can be arbitrarily shaped according to the designer’s design, made of relief or a variety of difficult art shapes. Especially for the nuances of the hole, the arc, the corner, etc., it can ensure the maximum reduction of the design concept and ensure the visual effect. In addition, it inherits the excellent characteristics of GRG, can be seamlessly laid out in a large area, forming a complete shape, overcoming the shortcomings of the traditional GRC that must reserve expansion joints and joints are easy to crack.
8, the project cost is low
GFRC’s performance in terms of material stability, strength, environmental protection and styling strength far exceeds that of GRC products, and it is easy to install and has a short construction period, which can save a lot of time and manpower and material resources, thus reducing construction costs.

1、質量輕
傳統GRC製品密度約3001KG/M3,而GFRC成品的平均密度僅為1301KG/M3
2、不變形
由於其主材對玻璃纖維無腐蝕作用,加之本身乾濕收縮小於0.01%,因此可以確保產品的性能穩定,不龜裂、不變形,使用壽命長。
3、強度高
經養護檢測,其衝擊強度為141MPa,抗折強度為27MPa。
4、腐蝕性低
目前的GRC製品採用的是玻璃纖維增強,其PH值高達13,為強鹼性,因此其強度會隨時間增長而逐漸下降。而GFRC的液態漿體PH值區於7-8之間,接近於中性,鹼性遠低於GRC製品,對玻璃纖維無腐蝕性,因此可確保其自身性能的穩定性。
5、加工周期短
產品脫膜時間僅需30-45分鐘,乾燥時間最短僅需4個小時,可充分保障工期進度要求。
6、施工便捷、靈活
現場加工性能好,可根據具體現場情況進行鋸、刨、釘、鑿、鑽、粘貼等作業,且安裝過程簡單、迅速,相對於傳統的GRC產品的作業流程,大幅度縮短了施工周期。
7、造型表現能力強
可根據設計師的設計任意造型,做成浮雕或各種高難度藝術造型。特別是對洞口、弧形、轉角處等細微之處,可確保最大程度還原設計理念,保證視覺效果。另外它繼承GRG優良特性,可進行大面積無縫密拼,形成完整造型,克服了傳統GRC必須預留伸縮縫及接頭易開裂的缺點。
8、工程造價低
GFRC在材料穩定性、強度、環保和造型力等方面的表現均遠遠超過GRC產品,且安裝便捷,工期短,可節省大量的時間及人力物力資源,從而降低了施工成本。

 


Details size development drawing

FV360_11

Product parts renderings

SPECIFICATIONS
– 400mmx400mmx18mm

規格

– 400mmx400mmx18mm


Use and application
– Residential
– Interior design
– indoor floor
– Business
– retail
– kitchen

用途和應用
– 住宅
– 室內設計
– 室內地板
– 商業
– 零售
– 廚房

 

If you are interested in the product, you can choose a single item, or the entire combination, there will be more concessions

如果您對該產品感興趣,您可以選擇單個項目,或整個組合,將有更多的優惠


 

The developed materials are as follows:

FV360_MT_1

Surface texture like a stone

FV360_MT_2

Surface texture like a stone

FV360_MT_3

Surface texture like a stone

FV360_MT_4

Surface texture like a stone

FV360_MT_5

Surface texture like a stone

FV360_MT_6

Surface texture like a stone

FV360_MT_7

Surface texture like a stone

FV360_MT_8

Surface texture like a stone

FV360_MT_9

Surface texture like a concrete

FV360_MT_10

Surface texture like a stone

FV360_MT_11

Surface texture like a concrete


If any request or suggest, please follow down below to comment.

如有任何要求或建議, 請按照以下方式進行評論.

Reviews

There are no reviews yet.

Be the first to review “Styling panel FV360_11-2|FutureView360”

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

or    

Forgot your details?

Create Account